The POF Revolution 308 is a popular AR-10 platform rifle known for its robust design and reliable performance. However, like any firearm, it can occasionally experience issues. This comprehensive guide dives deep into common POF Revolution 308 problems, providing troubleshooting tips and solutions to get you back on the range quickly and safely. We'll cover everything from minor malfunctions to more significant problems, ensuring you have the information needed to maintain and optimize your rifle.
Common POF Revolution 308 Issues and Solutions
While generally reliable, several problems can occur with the POF Revolution 308. These can often be traced to ammunition, maintenance, or user error. Let's break down some of the most frequently reported issues:
1. Feeding Problems: Failure to Feed or Failure to Eject
- Problem: The rifle fails to properly chamber a round or fails to eject a spent casing reliably. This can manifest as jams, stoppages, or incomplete cycles.
- Possible Causes: Improperly seated magazines, damaged magazines, weak or faulty magazine springs, ammunition issues (dirty, damaged, or improperly sized rounds), gas system malfunctions (gas block, gas tube, or piston issues), or a dirty or improperly lubricated bolt carrier group.
- Solutions:
- Inspect and clean: Thoroughly clean and lubricate the entire firearm, paying close attention to the bolt carrier group, gas system, and magazine.
- Check ammunition: Use high-quality, properly functioning ammunition specifically designed for the .308 Winchester caliber. Avoid using reloaded ammunition unless you are confident in its quality and consistency.
- Magazine assessment: Examine magazines for damage or wear. Replace worn springs or damaged magazines. Ensure magazines are properly seated.
- Gas system check: Ensure the gas system is clean and functioning correctly. If the gas block or tube is damaged or dirty, replace or clean as needed. Consult your owner's manual or a qualified gunsmith for proper gas system adjustment.
- Professional inspection: If the issue persists, take the rifle to a qualified gunsmith for a professional inspection.
2. Bolt Carrier Group (BCG) Issues
- Problem: Problems with the BCG can lead to a variety of malfunctions, including failures to lock back, failures to extract, and failures to feed.
- Possible Causes: Damage to the BCG components, insufficient lubrication, or build-up of fouling and debris.
- Solutions:
- Thorough cleaning and lubrication: Disassemble the BCG and carefully clean and lubricate all components. Pay close attention to the cam pin, bolt face, and extractor.
- Component inspection: Inspect all BCG components for damage or wear. Replace damaged parts as necessary.
- Professional service: If you're uncomfortable disassembling the BCG, take the rifle to a qualified gunsmith.
3. Accuracy Issues
- Problem: The rifle consistently shoots off target or groups poorly.
- Possible Causes: Poor ammunition, improper sighting, scope issues, dirty barrel, improper cleaning techniques, worn barrel, or problems with the rifle's chassis.
- Solutions:
- Check ammunition consistency: Use high-quality ammunition from a reliable manufacturer.
- Verify zero: Ensure your scope is properly zeroed.
- Barrel inspection: Inspect the barrel for damage, pitting, or excessive wear.
- Clean the barrel: Regularly clean the barrel using proper techniques.
- Scope evaluation: If using a scope, ensure it is properly mounted and functioning correctly.
4. Gas System Malfunctions
- Problem: The gas system may not cycle correctly, leading to failures to cycle or other malfunctions.
- Possible Causes: Gas block issues, gas tube issues, improper gas system adjustment, or build-up of debris.
- Solutions:
- Gas system cleaning: Thoroughly clean the gas system.
- Gas block and tube inspection: Inspect the gas block and tube for damage. Replace if needed.
- Gas system adjustment: Carefully adjust the gas system if necessary, consulting your owner's manual or a qualified gunsmith for proper procedures.
Maintaining Your POF Revolution 308
Regular maintenance is crucial for preventing problems and ensuring the long-term reliability of your POF Revolution 308. This includes:
- Regular cleaning: Clean the rifle after each use.
- Lubrication: Use a high-quality gun lubricant.
- Inspection: Regularly inspect all components for damage or wear.
- Storage: Store the rifle in a clean, dry environment.
Remember, always follow all safety precautions when handling firearms. If you are unsure about any repair or maintenance procedure, consult a qualified gunsmith. This guide provides general troubleshooting advice; the specific solution to your problem may depend on the particular circumstances.
