The Kimber Micro 9 is a popular concealed carry pistol known for its reliability and compact size. Proper disassembly and cleaning are crucial for maintaining its performance and ensuring its longevity. This guide provides a detailed, step-by-step process for safely disassembling your Kimber Micro 9. Always prioritize safety and follow all manufacturer instructions found in your owner's manual. Improper disassembly can lead to damage or injury.
Disclaimer: This guide is for informational purposes only. I am not a gunsmith, and this information should not be considered professional advice. Always consult your owner's manual and consider seeking professional assistance if you are uncomfortable performing any of these steps. Improper handling of firearms can be extremely dangerous.
Tools You Will Need:
- Kimber Micro 9 pistol
- A soft, clean cloth or gun cleaning mat
- A punch (optional, but recommended for easier takedown pin removal)
- A small container for storing small parts
Steps for Disassembly:
1. Safety First:
- Empty the magazine: Ensure the firearm is completely unloaded. Visually inspect the chamber to confirm it's empty.
- Point the firearm in a safe direction: Always point the gun in a safe direction, preferably downrange at a safe backstop.
2. Remove the Magazine:
- Depress the magazine release button (located typically on the left side of the frame) and remove the magazine from the pistol grip.
3. Lock the Slide to the Rear:
- With your finger off the trigger, use your thumb to pull the slide to the rear until it locks open.
4. Remove the Slide Stop:
- Carefully depress the slide stop lever (located on the right side of the frame) and pull it out. This will release the slide.
5. Remove the Slide:
- Gently pull the slide forward and off the frame. It might take a little effort.
6. Removing the Recoil Spring Assembly (Optional):
This step is usually only necessary for thorough cleaning or maintenance, and is not required for routine cleaning.
- With the slide removed, locate the recoil spring assembly at the front of the slide.
- Carefully remove the recoil spring and guide rod. There may be a small amount of tension. Proceed carefully.
7. Cleaning and Reassembly:
After cleaning all components thoroughly, reassembly follows the reverse order of disassembly.
- Carefully reinsert the recoil spring assembly (if removed) into the slide.
- Place the slide onto the frame, ensuring proper alignment.
- Insert the slide stop lever.
- Allow the slide to go forward.
- Reinsert the magazine.
8. Function Check:
Before carrying or using your firearm, always conduct a thorough function check to ensure all components are properly assembled and the firearm functions correctly. Dry fire the gun (with an empty chamber, of course) a few times to test the trigger and slide action.
Important Notes:
- Refer to your Kimber Micro 9 owner's manual for detailed diagrams and instructions. This guide should be used in conjunction with, not in place of, the manufacturer's instructions.
- If you are uncomfortable with any of these steps, consult a qualified gunsmith.
- Proper lubrication is crucial for the smooth operation of your Kimber Micro 9. Use a high-quality gun lubricant.
- Regular cleaning and maintenance will significantly extend the life of your firearm.
This comprehensive guide provides a detailed understanding of disassembling a Kimber Micro 9. Remember, safety is paramount; always handle firearms responsibly and carefully follow all instructions. If you have any doubts or questions, seek assistance from a qualified professional.
