Finding the perfect height for your Burris Zee rings is crucial for optimal scope performance and a comfortable shooting experience. This comprehensive guide provides a detailed Burris Zee rings height chart, along with explanations to help you select the correct ring height for your specific setup. We’ll cover factors influencing ring height selection and provide troubleshooting tips to ensure a precise and safe firearm setup.
Understanding Burris Zee Ring Heights
Burris Zee rings are known for their robust construction and reliable performance. However, choosing the right height is paramount. Incorrect ring height can lead to scope clearance issues, eye relief problems, and even damage to your scope or firearm. The height is measured from the top of the receiver base to the center of the scope tube.
Key Factors Affecting Ring Height Selection:
- Scope Diameter: Burris Zee rings are available for various scope diameters (e.g., 1 inch, 30mm). The ring height will vary depending on the diameter.
- Base Height: The height of your scope bases plays a significant role. Higher bases require lower rings, and vice versa.
- Action Type: The type of firearm action (bolt-action, lever-action, etc.) will affect the necessary clearance between the scope and the action.
- Objective Lens Size: Larger objective lenses require higher rings to avoid contact with the barrel or other firearm components.
- Eye Relief: Insufficient eye relief can be dangerous. Proper ring height ensures comfortable and safe shooting.
Burris Zee Rings Height Chart (Illustrative Example)
It's crucial to remember that this is an illustrative chart, and the actual measurements may vary slightly depending on the specific Burris Zee ring model and your firearm. Always consult the manufacturer's specifications for your exact model.
| Scope Diameter | Base Height (mm) | Recommended Ring Height (mm) | Notes |
|---|---|---|---|
| 1 inch (25.4mm) | Low (5mm) | 15-20mm | For low-profile setups |
| 1 inch (25.4mm) | Medium (10mm) | 10-15mm | Suitable for most applications |
| 1 inch (25.4mm) | High (15mm) | 5-10mm | For high-clearance requirements |
| 30mm | Low (5mm) | 20-25mm | For low-profile setups |
| 30mm | Medium (10mm) | 15-20mm | Suitable for most applications |
| 30mm | High (15mm) | 10-15mm | For high-clearance requirements |
Note: These are just examples, and the actual required height will vary significantly based on your specific firearm, scope, and bases. Measuring your components is essential.
How to Measure for the Correct Ring Height
- Measure Base Height: Carefully measure the height of your scope bases from the receiver rail to the top of the base.
- Measure Scope Diameter: Determine the diameter of your scope's main tube.
- Check Clearance: Install the scope bases and loosely place the scope in the rings. Carefully check for clearance between the scope, the barrel, and any other parts of the firearm.
- Consult Manufacturer's Specs: Review the detailed specifications provided by Burris for your particular Zee ring model and scope diameter.
Troubleshooting Common Issues
- Scope touching the barrel: This indicates you need higher rings.
- Insufficient eye relief: You might need lower rings.
- Scope not centered: Ensure your bases are correctly aligned and that you have the right ring size and height.
Important Safety Note: Always prioritize safety when mounting your scope. Incorrect installation can lead to serious injury or damage to your firearm. If you're unsure about any aspect of the installation process, seek assistance from a qualified gunsmith.
Conclusion
Choosing the correct Burris Zee ring height is crucial for a safe and effective shooting experience. By carefully considering the factors discussed and utilizing the measurement techniques provided, you can ensure your scope is properly mounted and optimized for performance. Remember, consulting the manufacturer's instructions is essential before making any modifications to your firearm.
